RRCAT Newsletter - Issue 1 of 2016

  From the Director's Desk
  From the Convener's Desk

 Accelerator Programme:
A.1: Utilization of Indus beamlines
A.2: Indus-2 up-gradation: Installation and commissioning of APPLE-2 undulator
A.3: Operation of Indus-2 at 100 mA, 2.5 GeV with undulator Ul
A.4: Development of OFE-Copper RF cavity for Indus-2
A.5: Processing and testing of single-cell 650MHz SCRF cavity
A.6: Indigenous development of semi-automaticcavity tuning machine
A.7: Development of compact power supplies for explosive detection system
A.8: Development of a CBP machine for 650MHz SCRF cavity
A.9: Development of an infra-red free electron laser (IR-FEL) at RRCAT
A.10: Status of 24 MW microwave system and LLRF control for IR-FEL linac
A.11: Differential vacuum pump for Indus-2 beam line
A.12: Bremsstrahlung source term from optimum targets
A.13: Data logging system enhancements for Indus accelerators
A.14: New distributed control system for Indus-1 RF using ECMs and EPICS
A.15: Development of a web server for sputter ion pumps power supplies Indus-2
A.16: Structural analysis of Ni1-xZnxO and its correlation with XANES data from lndus-2
A.17: Micro-structural analysis of nanolayered materials at BL-16 beamline

Laser Programme:

L.1: Removal of Q-16 coolant channel of KAPS-2 reactor by laser cutting
L.2: Laser cutting of steam generator tubes at KKNPP-2 reactor
L.3: Quasi-mono-energetic Au ion acceleration using high intensity lasers
L.4: Development of all-fiber thulium-doped CW fiber laser
L.5: Development of optoelectronic devices based on III-V semiconductors
L.6: Resistive memory switching in ultra-thinfilms of Ti02
L.7: Crystalline structure and band alignment property of InAs/Ge(lll)
L.8: Generation of UV beam by frequency summing of outputs of Copper-HBr laser
L.9: Two-isotope magneto-optical trap for noble gas Krypton atoms
L.10: Oblique laser peening enhances stresscorrosion cracking resistance
L.11: Antimicrobial photodynamic therapy induces angiogenesis in wounds
L.12: Photonic nanojet for enhancement of transmission through nano apertures
L.13: Use of Raman optical tweezers for cell cycle analysis

I.1: Civil and construction activities
I.2: Installation & commissioning of CNC wateijet cutting machine(CWJCM)

 Theme Articles:

T.1: A Novel Technology for Niobium to Austenitic Stainless Steel Brazed Joints
T.2: Laser Optogalvanic Spectroscopy and its Applications
T.3: Beam Lifetime Studies in Synchrotron Radiation Source Indus-2

 Publications: Publications from RRCAT during July 2015 to December 2015


N.1: 24th DAE-BRNS National Laser Symposium (NLS-24) at RRCAT
N.2: 32nd DAE Safety & Occupational Health Professionals Meet at RRCAT
N.3: One day theme meeting on Indus synchrotrons utilization
N.4: Participation ofRRCAT in National level Industrial Exhibition cum Vendor Development Programme
N.5: Honours andAwards
N.6: Superannuations
N.7: आरआरकेट में माह जुलाई 2015 से दिसंबर 2015 तक की अवधि के दौरान हिन्दी के प्रचार-प्रसार से संबंधित विभिन्न गतिविधियाँ
N.8: Public outreach program of RRCAT during Diamond Jubilee Year of DAE


RRCAT Newsletter - Issue 1 of 2016

  • Dr. Rajeev Khare

Editorial Board:
  • Dr. Vinit Kumar
  • Sh. Shailendra S. Tomar
  • Dr. M. B. Borage
  • Dr. Aparna Chakrabarty
  • Dr. Anand Moorti
  • Dr. Sunil Verma
  • Sh. J. K. Pattnaik
Best viewed in 1024x768 resolution