Design & Manufacturing Technology Division
Design & Manufacturing Technology Division

Publication List of DMTD

In Journals :

2020
  1. Development of technology for fabrication of prototype ion extraction grid for fusion research,
    Mukti Ranjan Jana, P. Ram Sankar,
    Fusion Engineering and Design, Volume 161, December 2020

  2. Challenges in fabrication of high aspect ratio electrostatic comb-drive microactuator using one-step X-ray lithography
    Rahul Shukla, Harindra Kumar Kannojia, C. Mukherjee, P. Ram Sankar, B. S. Thakur, A. K. Sinha1, Dhananjai Pandey
    ISSS Journal of Micro and Smart Systems, https://doi.org/10.1007/s41683-020-00064-z

2019
  1. Estimation, Optimization, and Performance of Layered Thermal Insulation Structure in a Wide Aperture Gas Discharge Copper Vapour Laser Assembly
    Choubey R.*
    Arabian Journal for Science and Engineering, Vol. 44, no. 6, p. 5937-5947, Feb. 2019

  2. Influence of material parameters on the performance of niobium-based superconducting radio frequency cavities
    Jana A.R.*, Kumar A.*, Dwivedi V.K.*, Roy S.B.*
    PRAMANA, Journal of Physics, Vol. 93, no. 51, 2019. https://doi.org/10.1007/s12043-019-1813-4

2018
  1. Cool down Studies in Cryo Components Testing Rig (CCTR)
    Choubey R.*
    Journal of Instrument Society of India, Vol. 48, no. 4, p. 121-123, Dec. 2018

  2. Vacuum brazing of Titanium/316L Stainless steel transition joint for application in Helium vessel of Superconducting RF Cavity
    Ganesh P.*, Kumar A.*, Vishwakarma S.C.*, Bose A.*, Gupta R.K.*, Sindal B.*, Rai S.K.*, Rao P.C.*, Sankar P.R.*, Nagpure D.C.*, Kaul R.*, Mundra G.*, Singh B.*
    Indian Welding Journal, Vol. 51, no. 3, p. null, Jul. 2018. https://doi.org/10.22486/iwj.v51i3.175005

  3. First lasing in an infrared free electron laser at RRCAT, Indore
    Pant K.K.*, Kumar V.*, Biswas B.*, Kumar A.*, Saini R.S.*, P. S.C.*, Gupta S.K.*, Khursheed M.*, Nerpagar P.*, Sarkar A.K.*, Pandit R.K.*, Ruwali K.*, Sreeramulu K.*, Das S.*, Chouksey S.*, Parate J.*, Bhanage V.P.*, Deshpande P.P.*, Tiwari S.*, Jain L.*, Valecha A.*, Pathak A.K.*, Ansari M.A.*, Bundel H.R.*, Shrivastava P.*, Raghu T.*, Kale U.*, Wanmode Y.D.*, Mohania P.*, Mulchandani J.K.*, Patel A.*, Acharya M.*, Mahawar A.*, Lad M.*, Jain M.K.*, Tiwari N.*, Bagduwal P.S.*, Joshi S.*, Kumar R.*, Singh A.*, Dwivedi V.K.*, Borage M.B.*, `Tiwari S.R.*
    Current Science, Vol. 114, no. 2, p. 367-373, Jan. 2018

  4. Template based room temperature growth of high density CdS nanowires from aqueous electrolyte using high frequency alternating current)
    R. Aggarwal, P. Ram Sankar, A.Sahu, Alka A.Ingale, A.K. Sinha & C. Mukherjee
    Journal of Materials Science: Materials in Electronics 29, 427-435 (2018)

  5. Maskless copper electroplating on stainless steel using DPSS green laser
    Gupta R.K., Singh A., Singh A., Sankar Ram P., Sharma S.K., Mukhopadhyay P.K., Ganesh P., Kaul R., Bindra K.S., Singh B.
    Surface Engineering 34, 446-453 (2018)

2016
  1. Efficiency evaluation of treatment methods adopted for safe disposal of rinse water generated from electrochemical processes
    B.Q. Khattak, Sunil Kumar Sharma, Budh Pal Singh & P. Ram Sankar
    Volume 57, 2016, Issue 55, Desalination and Water Treatment

  2. Study on requirement of nickel electroplating in OFE copper-316L stainless steel brazed joints
    Kumar A.*, Ganesh P.*, Kaul R.*, Yadav D.P.*, Karnewar A.K.*, Yedle K.N.*, Gupta R.K.*, Singh M.K.*, Sankar P.R.*, Bhatnagar V.K.*, Shridhar R.*, Joshi S.C.*, L. M. Kukreja
    International Journal of Advanced Manufacturing, 2016. DOI 10.1007/s00170-016-8664-7

  3. Process development for vacuum brazed niobium-316L stainless steel transition joints for superconducting cavities
    Kumar A.*, Ganesh P.*, Kaul R.*, Rao P.C.*, Yadav D.P.*, Sindal B.*, Gupta R.K.*, Shridhar R.*, Joshi S.C.*, Singh B.*
    ASME Journal of Manufacturing Science & Engineering, 2016. DOI: 10.1115/1.4034716

2015
  1. A New Vacuum Brazing Route for Niobium-316L Stainless Steel Transition Joints for SCRF Cavities,
    Kumar A, P. Ganesh, R. Kaul, V. K. Bhatnagar, K. Yedle, P. Ram Sankar, B. K. Sindal, K.V. Kumar, M. K. Singh, S. K. Rai, A. Bose, T. Veerbhadraiah, S. Ramteke, R. Sridhar, G. Mundra, S. C. Joshi, L. M. Kukreja
    Journal of Materials Engineering and Performance 24(2), 952-63, 2015

  2. New Brazing Recipe for Ductile Niobium-316L Stainless Steel Joints for SRF Cavities
    Kumar A.*, Ganesh P.*, Kaul R.*, Sindal B.*, Yedle K.N.*, Bhatnagar V.K.*, P. Ram Sankar, Singh M.K.*, Rai S.K.*, Bose A.*, Sridhar R.*, Joshi S.C.*, Kukreja L.M.*
    Welding Journal, Vol. 94, p. 241-249, 2015

  3. Study on Laser-Assisted Rejuvenation of Inter-Granular Corrosion Damaged Type 304 Stainless Steel
    R. K. Gupta, V. K. Bhardwaj, D. K. Agrawal, Manoj Kumar, B. N. Upadhyay, P. Ram Sankar, P. Ganesh, R. Kaul, S. M. Oak, L. M. Kukreja
    Lasers Manuf. Mater. Process. (2015) 2:135–147

2014
  1. Numerical Simulation of Laser Rapid Manufacturing of Multi-Layer Thin Wall Using Improved Mass Addition Approach
    Kumar A., Paul C.P., Padiyar A.S.,Bhargava P., Mundra G., Kukreja L.M.,
    Numerical Heat Transfer Applications 65(9), 885-910, 2014

  2. A Study on Low Magnetic Permeability Gas Tungsten Arc Weldment of AISI 316LN Stainless Steel for Application in Electron Accelerator
    Kumar A.*, Soni R.K.*, Ganesh P.*, Kaul R.*, Bhatnagar V.K.*, Dwivedi J.*, Kukreja L.M.*
    Materials and Design, Vol. 53, p. 86-92, Jan. 2014

  3. Study on weld bead surface profile and angular distortion in 6 mm thick butt weld joints of SS304 using fiber laser,
    P. Bhargava, C.P. Paul, G. Mundra, C.H. Premsingh, S.K. Mishra, D. Nagpure, Atul Kumar, L.M. Kukreja,
    Optics and Lasers in Engineering 53, 152–157, 2014

  4. Fabrication of high aspect ratio comb-drive actuator using deep X-ray lithography at Indus-2,
    Rahul Shukla, V. P. Dhamgaye, V. K. Jain, P. Ram Sankar, C.Mukherjee, B. D. Pant and G. S. Lodha
    Microsystem Technologies, July 2014, Volume 20, Issue 7, pp 1273-1280 (Published on line on 20th June 2014)

2008
  1. HF-Emag.-Thermal coupled field analysis of RF cavities, Pill Box RF cavity, as a case study.In A Festschrift in Honour of Professor Suhas P. Sukhatme,
    Jain V.K., Mundra G., U. V. Bhandarkar, K. Iyer
    Eds. U. N. Gaitonde, Research Publishing Services, Singapore, ISBN:978-981-05-9611-8, (2008 )

Papers presented in Conferences :

2020
  1. Study on development of vacuum brazing recipes for dissimilar transition joints (AlN-Mo and AlN-Ti) for application in beam position monitors for low emittance storage ring
    Babbar L.K.*, Kumar A.*, Ganesh P.*, Kumar M.*, Soni A.K.*, Vishwakarma S.C.*, Gupta R.K.*, Nagpure D.C.*, Yadav N.S.*, Vaishnav D.*, Singh R.*, Singh M.K.*, Yadav D.P.*, Kaul R.*, Sheth Y.M.*, Puntambekar T.A.*
    Fifth International Congress IC 2020 of Indian Institute of Welding (IIW India) , New Mumbai, Feb., 6-8, 2020

  2. Sucessful fabrication of Horizontal Test Stand (HTS) cryostats in Indian industry for testing 650 MHz SCRF cavities
    Gilankar S.G.*, Ghosh R.*, Khare P.*, Patel H.K.*, A. L.*, Jain A.*, Shukla A.K.*, Tiwari A.*, Arzare D.K.*, Bhatnagar V.K.*, Gupta R.K.*, Mundra G.*, Shrivastava P.*, J. P. Ozelis, A. Hocker, M. G. Geynisman, C. M. Reid, V. V. Poloubotko, D. V. Mitchell, T. J. Peterson, T. H. Nicol
    InPac-2020 , New Delhi, Jan., 9-12, 2020

2019
  1. Machining trials on vane structures of RFQ of 3 MeV, 325 MHz RFQ
    Veerbhadraiah T.*, Kane G.V.*, Chaturvedi A.*, Chouksey S.*, Mundra G.*
    Indian Particle Accelerator Conference INPAC 2019 , New Delhi, Nov., 18-21, 2019

  2. Machining challenges for the development of 650 MHz multi cell SCRF Cavities
    Sharma S.*, Prasad R.K.*, Chaterji U.*, Veerbhadraiah T.*, Sisodia B.*, Maurya T.*, Verma V.K.*, Moulali S.*, Bagre M.*, Srivastava V.K.*, Chouksey S.*, Mundra G.*
    Indian Particle Accelerator Conference INPAC 2019 , IUAC New Delhi, Nov. , 2019

  3. Fabrication of a 270 degree bending magnet core assembly for energy filtering system of ARPF, RRCAT
    Sisodia B.*, Sharma S.*, Veerbhadraiah T.*, Bhatnagar V.K.*, Chouksey S.*, Vishwakarma S.C.*, Mundra G.*, Sreeramulu K.*, Malik R.*, Sinha G.*, Goswami S.G.*, Soni R.K.*, Kumar P.*, Dwivedi J.*
    Indian Particle Accelerator Conference INPAC 2019 , IUAC, New Delhi, Nov. , 2019

  4. Machine tool requirements for making particle accelerator component
    Choudhary S.*, Chouksey S.*, Mundra G
    InPAC- 2019, Inter-University Accelerator Centre (IUAC) , New Delhi, Nov., 18-21, 2019

  5. Challenges in manufacturing of Accelerator components and sub assemblies at RRCAT
    Mundra G.*
    theme meeting of High Intensity Proton Accelerator (HISPA) , RRCAT INDORE, Jun., 21, 2019

  6. Experience on fabrication of 650 MHz five-cell SCRF cavities using Electron Beam
    Manish Bagre#, S. Moulali, V. Vijayakumar, Ashish Singh, T Maurya, Umakant Srivastava, Ajay Yedle, Anand Yadav, Vinesh Verma, V K Srivastava, Sanjay Sharma, T Veerbhadraiah, G. kane, Rajeshwar Shanda, P Mohania, A. Mahawar, P Ram Sankar,A. Puntambekar.
    Welding” Indian Particle Accelerator Conference INPAC 2019, IUAC, New Delhi, Nov., 18-21, 2019

  7. Progress of 650 MHz Five-cell SCRF cavity at RRCAT
    Puntambekar A.*, Kane G.V.*, Mundra G.*, Sankar P.R.*, Raghavendra S.*, Shrivastava P.
    Indian Particle Accelerator Conference INPAC 2019 , New Delhi, Nov., 18-21, 2019

  8. Design and Development of Flange Integrated Beam Position Monitors for Indus-1 Storage Ring and Infrared Free Electron Laser Set-up
    Babbar L.K.*, Kumar M.*, Yadav D.P.*, Upadhyaya B.N.*, Bhatnagar V.K.*, Sisodia B.*, Sindal B.*, Tiwari S.K.*, Holikatti A.C.*, Yadav S.*, Tyagi Y.*, Soni A.K.*, Vaishnav D.*, Sheth Y.M.*, Puntambekar T.A.*
    InPAC , IUAC, New Delhi, Nov. , 2019

  9. Design and Development of Upgraded Integrated Type Beam Position Indicators for Dipole Vacuum Chambers of Indus-2 SRS
    Babbar L.K.*, Kumar M.*, Upadhyaya B.N.*, Bhatnagar V.K.*, Sisodia B.*, Yadav D.P.*, Sindal B.*, Tiwari S.K.*, Tyagi Y.*, Holikatti A.C.*, Yadav S.*, Vaishnav D.*, Sheth Y.M.*, Puntambekar T.A.*
    INPAC-2019 , IUAC ,New Delhi, Nov. , 2019

  10. Study of Metal Assisted Chemical Etching as an alternative to Dry Etching for the development of MEMS
    Varun P Sharma, Swati J Singh, Rahul Shukla1, Pragya Tiwari, P Ram Sankar, C Mukherjee, A K Srivastava,
    International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore

  11. Setting-up of effluent treatment facility for neutralization of used-acid from electropolishing of SCRF cavities
    Suhane S.K., Ram Sankar P., Singh A., Chauhan S.K., Singh B.P., Bose A., Sahu A., Oraon B., Hussain A., Raghavendra S., Joshi S.C.,
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

2018
  1. Fabrication of Circulator for Indus-2 RF System
    Sanjay Sharma, Ashish Kumar Tiwari ,BN Sisodia, G. Mundra, M. Lad, Rajesh Kumar Prasad, Ramesh Kumar, R.S. Shinde,Sanjay Chouksey,T Veerbhadraiah, Vinod Gaud, V.K. Bhatnagar, Utpal Chatarji,
    InPAC-2018, at RRCAT

  2. Modification in Indus-2 dipole magnet vacuum chambers to extract high brilliance synchrotron radiation coming from insertion devices
    T Veerbhadraiah, G. Mundra, Sanjay Chouksey, B K Sindal, D P Yadav, R Shridhar, Mohammed Abrar, Utpal Chatarji
    InPAC-2018, at RRCAT

  3. Process Safety Management in Design, Manufacturing and Technology Division
    Choudhary S.*, Ramteke S.*, Bhatnagar V.K.*, Chouksey S.*, Mundra G.
    35th DAE Safety & Occupational Health Professional Meet -2018 , VECC Kolkata, Nov., 27-29, 2018

  4. Identification of flurosulphonic acid in niobium electropolishing solution
    Sankar Ram P., Khattak B.Q., Sharma S.K., Singh B.P., Deshmukh G.S., Senecha V.K., Joshi S.C
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

  5. Silver plating of berillium copper contact fingers for application in Indus-2 storage ring,
    Singh A.P., Deshmukh G.S., Kumar Narendra, Ram Sankar P., Yadav D.P., Senecha V.K., Joshi S.C.,
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

  6. Indigenous development of first five-cell 650 MHz SCRF cavity and series manufacturing plans.
    A Puntambekar, M Bagre, R S Sandha, P Shrivastva, G. Mundra, P Ramshankar and S C Joshi
    InPAC Jan., 9-12, 2018, Indore

  7. Experimental beam tests to investigate linac component performance
    Ajay Kumar, Pramod R., R.S. Sandha, S.G. Goswami, R.S. Choudhary, Deepak Mishra, V.C. Petwal, Arihant Jain, Y. Wanmode, T. Reghu, J. Mulchandani, Anil Holikatti, Rahul Jain, Nita Kulkarni, Vinit Kumar, M. Seema, Y. Sheth, P. Gothwal, V.K. Gauttam, A. Kasliwal, B.K. Sindal, R. Sridhar, Subrata Das, Ritesh Malik, Gautam Sinha, R.K. Sahu, A.D. Ghodke, Jishnu Dwivedi, P. Shrivastava, P. Fatnani, T.A. Puntambekar, G. Haridas4, S.R. Tiwari, R. Sridhar, G. Mundra, R.S. Shinde, A.C. Thakurta
    InPAC-2018, at RRCAT

  8. Development of X-ray Target for Industrial Electron Linac
    R.S. Choudhary, R.S. Sandha, S.G. Goswami, V.C. Petwal, V.P. Verma, Jishnu Dwivedi, T. Veerbhadriah, B.N. Sisodia, V. Bhatnagar, S.Chouksey, G. Mundra
    InPAC-2018, at RRCAT

  9. RF and Thermal Design, Assembly and Testing of High Power Circulator for Indus-2
    Ashish Kumar Tiwari, Ramesh Kumar, Alok Gupta and Mahendra Lad, Girdhar Mundra, Sanjay Chauksey, Manjeet Ahelawat, Prashant Pareek and R S Shinde
    InPAC-2018

  10. Development of Second 10MeV Industrial electron Linac
    R.S. Sandha, S.G. Goswami, R.S. Choudhary, V.C. Petwal, Ajay Kumar, Arihant Jain, Pankaj Kumar, Y. Wanmode, T. Reghu, J.K. Mulchandani, S. Reddy, M. Seema, P. Gothwal, Y. Sheth, Nita Kulkarni, Vinit Kumar, A.C. Holikatti, Rahul Jain, R.M. Pandey, V.K. Gauttam, A. Kasliwal, B.K. Sindal, Sanjay Sharma, T. Veerbhadriah, K. Yedle, V. Bhatnagar, Jishnu Dwivedi, P. Shrivastava, P. Fatnani, T.A. Puntambekar, G. Haridas, S.R. Tiwari, R. Sridhar, G. Mundra, R.S. Shinde, A.C. Thakurta
    InPAC-2018

  11. DEVELOPMENT AND INSTALLATION OF UPGRADED BEAM POSITION INDICATORS FOR INDUS-2 SYNCHROTRON RADIATION SOURCE
    L. K. Babbar*, Mukesh Kumar, Dr. B. N. Upadhyaya, V. K. Bhatnagar, Brahmanand Sisodia, Y. Tyagi, Rahul Jain, A. C. Holikatti, Surendra Yadav, Deepjwalit Vaishnav, S. Sarkar,S. K. Tiwari,D. P. Yadav, R. Sridhar and T. A. Puntambekar
    INPAC, RRCAT, Indore 2018

  12. Development of beam diagnostic line for ARPF Linac
    Pankaj Kumar*, S.G. Goswami, Ajay Kumar, Arihant K Jain, Subhajit Dutta, V C Petwal, R S Sandha, Jishnu Dwivedi, Vanshree Thakur, S. Das, K. Sreeramulu, T. Veerbhadraiah, Sanjay Sharma, Brahmanand Sisodia, V K Bhatnagar, Sanjay Chouksey, V K Gautam, A Kasliwal, Y M Sheth, Rahul Jain, A C Holikatti, A K Karnewar, Mukesh Kumar, T A Puntambekar, R S Saini, B K Sindal, Y Wanmode and T Reghu”
    INPAC, RRCAT, Indore 2018

  13. Development of magnets for beam diagnostic line of ARPF Linac
    S. Das*, K. Sreeramulu, Vanshree Thakur, Kushraj Singh, Bhim Singh, Ashok Kumar , A. K. Mishra, B. Srinivasan , R.S.Shinde, Pankaj Kumar , S.G. Goswami, Jishnu Dwivedi, T. Veerbhadraiah, Utpal Chaterji and Brahmanand Sisodia
    INPAC, RRCAT, Indore 2018

  14. RF and Thermal Design, Assembly and Testing of High Power Circulator for Indus-2
    Tiwari A.K.*, Kumar R.*, Gupta A.K.*, Lad M.*, Mundra G.*, Chouksey S.*, Ahlawat M.*, Pareek P.*, Shinde K.R.*
    Indian Particle Accelerator Conference INPAC 2018 , RRCAT Indore, Jan., 9-12, 2018

  15. ENGINEERING ASPECTS OF RADIATION SHIELDING STRUCTURES
    Parchani G.*, Suresh N.*, Lambhate Y.*, A. K.R.*, Rangire A.*, Chouksey S.*, Petwal V.C.*, Nair G.H.*
    NSRP-21 , RRCAT, Mar. , 2018

  16. Magnetic characterization of the undulator for IR-FEL at RRCAT
    P. S.C.*, Biswas B.*, Bhanage V.P.*, Chouksey S.*, Das S.*, Kumar A.*, Gupta R.K.*, Parihar S.S.*, Sahu R.K.*, Valecha A.*, Kumar V.*, Pant K.K.*
    Indian Particle Accelerator Conference-InPAC 2018 , RRCAT, Indore, Jan., 9-12, 2018, p. ID-272

  17. Infrastructure development for 650 MHz SCRF cavity fabrication by laser welding
    Ghosh R.*, Jain A.*, Patidar S.C.*, Choubey R.*, Gupta C.*, Singh L.*, Sharma D.*, A. L.*
    InPac-2018 , Indore, Jan., 9-12, 2018, p. 5

  18. Studies on quantification of niobium in acid solutions used for electropolishing of SRF cavities
    Khattak B.Q., Ram Sankar P., Sharma S.K., Singh B.P., Deshmukh G.S., Senecha V.K., Joshi S.C.,
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

  19. Electropolishing of five-cell 650 MHz (beta=0.92) superconducting RF cavity
    Raghavendra S., Das K.K., Singh A., Kokil S.V., Chauhan S.K., Bose A., Ram Sankar P., Suhane S.K., Rajpoot D.S., Singh A.P., Hussain M.A., Prasad K., Sahu A., Joshi S.C.
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018,Indore

  20. Processing and testing of first single-cell 650 MHz (beta=0.92) superconducting RF cavity
    Raghavendra S., Das K.K., Singh A., Kokil S.V., Suhane S.K., Kane G.V., Chauhan S.K.,Bose A., Ram Sankar P., Singh A.P., Yadav A., Puntambekar A., Joshi S.C
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018,Indore

  21. Development of rectangular microwave cavity resonator using x-ray LIGAat Indus-2 in RRCAT
    Shukla R., Agrawal V.*, Gupta Akshita*, Shrivastava P., Singh K.A.P., Sankar Ram P.
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

  22. Laboratory studies on treatment of used niobium electropolishing solution and neutralization tank design
    Singh B.P., Khattak B.Q., Sharma S.K., Deshmukh G.S., Ram Sankar P., Senecha V.K., Joshi S.C.,
    DAE-BRNS 8th Indian Particle Accelerator Conference (InPAC-2018) Jan., 9-12, 2018, Indore

2017
  1. Manufacturing of SCRF cavity related Components/Sub-assemblies” (Invited talk)
    G Mundra
    (SCRFW-2017 Workshop on Technology Development for Superconducting RF Cavities) during 18 to 21-July-2017, at RRCAT, Indore

  2. Vacuum brazing of titanium/316L stainless steel transition joint for application in helium vessel of superconducting RF cavities
    P. Ganesh, Abhay Kumar, S. C. Vishwakarma, Aniruudha Bose, Ram Kishor Gupta, S. K. Rai, P. Chinna Rao, P. Ram Sankar, D. C. Nagpure, R. Kaul, G. Mundra and B. Singh
    International Congress (IC-2017) of The International Institute of Welding at Chennai during Dec. 7-9, 2017

2016
  1. Analysis and Measurement of a Vibration Isolation of a Structure using Magneto - Rheological Fluid,
    Neha Raju, Arvind Singh Padiyar, Mandale M.B., G. Mundra
    Proceedings of the 2nd National Conference for Engineering Post Graduate Students in RIT NConPG-16, May 2016

  2. Role of dye cell gap on the performance of output characteristics of high repetition rate narrow linewidth dye laser
    Mishra G.K.*, Kumar A.*, Prakash O.*, Biswal R.*, Dixit S.K.*, Nakhe S.V.*
    DAE-BRNS National Laser Symposium (NLS-25) , KIIT, Bhubenashwar, Dec., 20-23, 2016, p. CP-1.52

2015
  1. Fabrication of a cuboidal shaped aluminum alloy laser plasma interaction vacuum chamber using Manual GTAW process, for 150 TW Ti:sapphire laser system
    B. Sisodia V. K. Bhatnagar, P.K. Tripathi, G. Mundra
    Jan 22-24 2015 , NSW 2014-15, Jamshedpur

  2. Manufacturing of Ultra High Vacuum compatible Accelerator and Laser components, (Invited Talk)
    G Mundra, S D Sharma,V Bhatnagar, R Gupta,T Veerbhadraiah S Choudhary R Sanjeev S Sharma,K Yedle, B Sisodia,A S Padiyar, S Chouksey, J Dwivedi, S C Joshi, R Kumar, P Ram Sankar, R Sridhar, P. K. Tripathi, & A C Thakurta
    IVSNS-2015, TIFR Mumbai during 18-20 November-2015

  3. Manufacturing of Indigenous RF Cavity for Indus-2,
    G. Mundra, S D Sharma, Ramesh Kumar, Vivek Bhatanagar, V. G. Sathe, Rakesh Gupta, T Veerbhadraiah, Sanjay Sharma Kamlesh Yedle, Brahmanand Sisodia, P Ram Sankar, Ashish Tiwari, M Prasad and Mahendra Lad
    InPAC-2015, TIFR, Colaba, Mumbai, during December 21-24, 2015

  4. Development of vacuum brazed niobium-316L stainless steel transitions joints for superconducting cavities
    Abhay Kumar, P. Ganesh, R. Kaul, P. Ram Sankar, B. K. Sindal, D. P. Yadav, V. K. Bhatnagar, K. Yedle, Ram Kishor Gupta, Sanjay Sharma, S. D. Sharma, Rakesh Kumar Gupta, R. Sridhar, G. Mundra, S. C. Joshi and L. M. Kukreja
    National Welding Seminar, Dec 9-11, 2015, Mumbai

  5. Mechanical Design and Development of Beam Transport System for Infra-Red Free Electron Laser (IR-FEL),
    Arvind singh Padiyar, Jagdish kumar Parathe, Miti Ranadive, Sanjay Chouksey, G Mundra
    Indian Particle Accelerator Conference (InPAC-2015), Dec 2015

  6. Safety aspect in developing technology in machining facilities lab, ACDFS
    S.D. Sharma ,S. Sharma, T Veerabhadraiah and G Mundra
    32nd DAE safety and Occupational Health professionals meet, RRCAT, October 5 to 7, 2015

  7. Copper Deposition on Prototype Drift Tube Linac Tank
    P. Ram Sankar, A. P. Singh, B. P. Singh, B. Q. Khattak, S. K. Suhane, S. Raghavendra and S. C. Joshi
    Indian Particle Accelerator Conference, Dec. 21-24, 2015, Mumbai

  8. Development efforts of RF Collinear Load for 10 MeV,6 kW travelling wave Linac,
    P. Kumar, H. Kumar, RK Soni, J. Dwivedi, AC Thakurta, T S. Reddy, YD Wanmode, PK Jana, Sanjay Sharma, KN Yedla, VK Bhatnagar, SD Sharma, G Mundra, M. Ahlawat, P. Pareek, S S. Kumar and RS Sinde
    Inpac-2015,TIFR, Mumbai

  9. Engineering Design and Development of 10 MeV, S-band Accelerating Structure
    RS Sandha, SG Goswami, RS Choudhary, Jishnu Dwivedi, Sanjay Sharma,T Veerbhadraiah, SD Sharma, KN Yedle, VK Bhatnagar, P Ram Shankar, P Ganesh, Rakesh Kaul, Nita Kulkarni Vinit Kumar, Prasant Jana, Y Wanmode, Sivanand Reddy, P Shrivastava, R Shridhar, G Mundra, AC Thakurta
    Inpac-4Nov 2015,TIFR,Mumbai

  10. Development of a Plane Wave Transformer(PWT) linac for the Infra-red Free Electron Laser (IR-FEL) project at RRCAT
    S.K. Gupta, Shankar Lal, S.S. Parihar, Ramesh More, K.N. Yedle, B. Sisodia, U.P. Pandey, V.K. Bhatnagar, Sanjay Sharma, T. Veerbhadraiah, S.D. Sharma, A.P. Singh, P. Ram Sankar, R.K. Gupta, Girdhar Mundra, K.K. Pant and Sanjay Chouksey
    Proceedings of DAE-BRNS Indian Particle Accelerator Conference, 2015 BARC, Mumbai December, 21-24 2015

  11. Progress on SCRF cavity manufacturing activities at RRCAT
    Puntambekar A., Dwivedi J.,Mundra G., Shrivastava P., Joshi S.C., Gupta P.D
    Indian Particle Accelerator Conference (InPAC-2015), Mumbai, Dec., 21-24, 2015

  12. Development and beam tests of a new 20MeV injector microtron for Indus
    Dutta S., Goswami S.G., Rao K.V.S.R., Kumar Pankaj, Soni R.K., Pramod R., Dwivedi J., Baxy D., Wanmode Y.D., Reddy T.S., Mohania P., Shrivastava P., Sheth Y.M., Maheswari P., Mehr B.N., Fatnani P., Das S., Sreeramulu K., Shinde R.S., Pagare A., Amban A.K., Tiwari S., Thakurta A.C., Sharma S.D.,Bhatnagar V.K., Sisodia B., Mundra G., Haridas G.,Holikatti A.C., Pandey R.M., Puntambekar T.A., Ram Sankar P
    Indian Particle Accelerator Conference (InPAC-2015), Mumbai, Dec., 21-24, 2015

  13. Vacuum Brazing of OFE Copper-316L Stainless Steel Transition Joints without Electroplating Stainless Steel Part for application in Particle Accelerators
    D. P. Yadav, A. Kumar, P. Ganesh, R. Kaul, P. Ram Sankar, K. Yedle, M. K. Singh, R. K. Gupta, A.K. Karnewar, V. K. Bhatnagar and R. Sridhar
    Proc. Indian Particle Accelerator Conference, Dec. 21-24, 2015, Mumbai, ID-355

  14. A corrosion study on vacuum brazed joints of LINAC,
    R. K. Gupta, P Ram Sankar, A. Bose, S. K. Rai, P. Ganesh, R. Kaul, R. S. Sandha, J. Dwivedi and B. Singh
    Proc. Indian Particle Accelerator Conference, Dec. 21-24, 2015, Mumbai, ID-360

  15. Laser surface treatment for rejuvenation of fatigue and corrosion damage,
    P. Ganesh, R. Sundar, R. K. Gupta, V. K. Bharadwaj, B. Sunil Kumar, D. K. Agrawal, D. C. Nagpure, B. N. Upadhyay, M. Kumar, G. Raghvebndra, R. Kaul, P. Ram Sankar, K. Ranganathan, V. Kain, K. S. Bindra, S. M. Oak and L. M. Kukreja
    Proc. National Laser Symposium, Dec. 2-5, 2015, ID-8.1

  16. Status of 48.5 MHz Radio Frequency Quadrupole at IUAC, New Delhi
    R Ahuja, A Kothari, Sugam Kumar, C P Safvan, A Roy, D Kanjilal and P Ram Sankar
    Indian Particle Accelerator Conference, Dec. 21-24, 2015, Mumbai.

  17. Dynamic stress measurements using photo-elastic method and FEM stress analysis in flash lamps of Optical amplifiers used in high energy high power laser
    A.P. Kulkarni, A. I. Pathan, A.S. Padiyar, M.P. Kamath, A.S. Joshi, G Mundra, P.A. Naik, and P. D. Gupta,
    National Laser symposium (NLS), Dec 2015

  18. Processing and Testing of Single-Cell 650 MHz Superconducting RF Cavity
    S.Raghavendra, S.K.Suhane, S.K.Chauhan, S.Kokil, P.Ram Sankar, K.K.Das, Amar Singh, D.S.Rajpoot, A.P.Singh, Mohd. Asif Hussain & S.C.Joshi
    Indian Particle Accelerator Conference, Dec. 21-24, 2015, Mumbai

2014
  1. A study on vacuum brazing of niobium-stainless steel transition joint for application in superconducting RF cavities
    Abhay Kumar, P. Ganesh, R.Kaul, V. K. Bhatnagar, P. Ram Sankar, K. Yedle, M. K. Singh, A. Bose, S. Ramteke, B. K. Sindal, K.V.A.N.P.S. Kumar, T. Veerbhadraiah, R. Sridhar, G. Mundra, S. C. Joshi and L. M. Kukrej
    International Institute of Welding International Congress IIW-IC2014, April 9-11, 2014, New Delhi

  2. Measurements of mechanical vibrations in flash lamp holders for the damping properties
    Padiyar A.S., Tanwani S., Joshi A.S., Tripathi P.K., Ansari M.S., Mundra G., Navathe C.P., Naik P.A., Gupta P.D
    22nd National Laser Symposium, MIT,ManipalUniversity, Manipal, Inda, Jan., 8-11, 2014

  3. Design, development and studies of efficient large sized amplifier for use in high energy, high power Nd:glass laser systems
    Kamath M.P, R. Jadhav, Tripathi P.K., Kumar A., Kulkarni A.P., Jain S., Patwa S., Kumbhare M.N., Joshi A.S., Singh B., Ansari M.S., Padiyar A.S., Mundra G., Navathe C.P., Naik P.A., Gupta P.D
    XXIII DAE-BRNS National Laser Symposium , Tirupati, Dec., 3-6, 2014

  4. Development of Superconducting Cavities and related Infrastructure for High Intensity Proton Linac for Spallation Neutron Source
    S C Joshi, S Raghavendra, V K Jain, A Puntambekar, P Khare, J Dwivedi, G Mundra, P K Kush, P Shrivastava, S B Roy, P R Hannurkar and P D Gupta
    International Linac conf.-2014

  5. Thermal analysis of an insertion device based synchrotron beamline mirror using Finite Element Method
    Kalidas Magar, Asim Kumar Das, Vikas kumar Jain, A S Padiyar, Kavita soni, LN Wankahde, G. Mundra, NK Sahoo,B. N. Rajsekhar
    Emerging Trends in Engineering, May 2014

  6. Vibration studies of flash lamp assembly by optical methods
    Kulkarni A.P.*, Kamath M.P.*, Padiyar A.S.*, Jain S.*, Patwa S.*, A. Nair, Saha D.*, Ansari M.S.*, Joshi A.S.*, Navathe C.P.*, Naik P.A.*, Gupta P.D.*
    XXIII DAE-BRNS National Laser Symposium , Tirupati, Dec., 3-6, 2014

  7. Highly repetitive ultra-short collimated K-alpha x-ray source produced by high intensity laser pulse irradiation
    Rathore R.*, Arora V.*, Mandal T.*, Padiyar A.S.*, Chakera J.A.*, Naik P.A.*, Gupta P.D.
    23rd DAE-BRNS National Laser Symposium , Tirupati, Dec., 3-6, 2014

  8. Static stress measurements in flash lamp tubes using polarimetry
    Kulkarni A.P.*, Padiyar A.S.*, Kamath M.P.*, Patwa S.*, D. C. Gawade, Kumbhare M.N.*, Joshi A.S.*, Naik P.A.*, Gupta P.D.*
    22nd DAE-BRNS National Laser Symposium , MIT, Manipal University, Manipal, Karnataka, Jan., 8-11, 2014

2013
  1. Surface Treatment and Modification of Accelerator Components for Functional Requirements,
    P. Ram Sankar, B. Q. Khattak, A. P. Singh, B. P. Singh and S. C. Joshi,
    Indian Particle Accelerator Conference, Nov 19‐22, 2013, VECC, Kolkata

  2. Development of low magnetic permeability GTA welds of AISI 316LN stainless steel for application in particle accelerators
    R. K. Soni, Abhay Kumar, P. Ganesh, R. Kaul, V. K. Bhatnagar, S. G. Goswami, R. S. Choudhary, R. S. Sandha, T. Veerbhadraiahi, K. N. Yedle, B. Sisodia, D. C. Nagpure, J. Dwivedi, A. C. Thakurta, G. Mundra and L. M. Kukreja
    National Welding Symposium, Feb. 2013, Bangalore

  3. SCRF Cavity development at RRCAT
    Avinash Puntambekar, J. Dwivedi, P. Shrivastava, G. Mundra, S C Joshi, P D Gupta
    InPAC 2013, Nov. 19-22, 2013. VECC, Kolkata

  4. New Technique and result of Laser welded SCRF cavity developed at RRCAT
    P. Khare, R. Arya, J.Dwivedi,R. Ghosh, S. Gilankar, C. Gupta, P.D. Gupta, A. Jain,S.C. Joshi, G.V. Kane, R. Kaul, P.K. Kush, G. Mundra, S. M. Oak, C.K. Pithawa,P. Ramù Sankar, S.B. Roy, V.C. Sahni, R.S. Sandha, P.Shrivastatva, B.N. Upadhyay,Raja Ramanna Centre for Advanced Technology, Indore, India, A. Rowe, A. Grassellino, C. Cooper, C. Ginsburg, S. Mishra
    Fermi National Accelerator Laboratory, Batavia, USA, Proceedings of SRF2013, Paris, France, 2013

  5. Development of 650 MHz, β 0.9 Single cell SCRF Cavity
    Manish Bagre#, Ajay Yedle, Tilak Maurya, Anand Yadav, A Puntambekar, RS Sandha, Jishnu Dwivedi, GV Kane, SC Joshi, Sanjay Sharma, Rakesh Gupta, Ashish Mahawar, Praveen Mohaniya, P Shrivastava, Kishore Mistri, PN Prakash, Vikas Kumar Jain.
    Indian Particle Accelerator Conference INPAC 2013, VECC, Kolkatta, Nov., 2013

  6. Design & Fabrication of Radio Frequency Quadrupole (RFQ) Accelerator at IUAC, New Delhi,
    R.Ahuja, A.Kothari, C.P.Safvan, Sugam Kumar, P. Ram Sankar
    Indian Particle Accelerator Conference, Nov 19‐22, 2013, VECC, Kolkata

  7. Processing of Single Cell 1.3 GHz Super Conducting RF Cavity,
    S.Raghavendra, S.K.Suhane, S.K.Chauhan, N.K.Sharma, P.Ramsankar, K.K.Das,S.Kokil, Amar Singh, A.Chaturvedi, A.P.Singh, D.S.Rajpoot, S.C.Verma, Mohd. Asif Hussain & S.C.Joshi
    Indian Particle Accelerator Conference, Nov 19‐22, 2013, VECC, Kolkata

2012
  1. Design, fabrication and performance testing of a vacuum chamber for pulse compressor of a 150 TW Ti sapphire laser
    P.K.Tripathi, Rajvir Singh, V.K.Bhatnagar, S.D.Sharma , Sanjay Sharma, B.Sisodia, K.Yedle, R.P.Kushwaha, S.Sebastin, and G.Mundra
    VNS-2012 , VECC, Kolkata, Jan-2012.

  2. Study on distortion behavior during welding of 6 mm thick SS 304 using 2 kW fiber laser.
    P Bhargava, C P Paul, S K Mishra, U Chaterji*, C H Premsingh, G. Mundra and L M Kukreja
    Manu A-07-005, NLS-20, 2012

  3. A job temperature profile monitor system for vacuum brazing furnace at RRCAT
    Sanjeev Ramteke, Piyush Saxena, Inderjeet Singh, Vijay Khandare, U.K. Shrivastava and Girdhar Mundra
    National Symposium on Instrumentation (NSI-37) at CSIR Chandigarh during 30th Oct to 1st Nov., 2012.

  4. Numerical Simulation of Temperature and Thermal Stress Distributions during Laser Rapid Manufacturing of Multilayer Ti-SS Transition Joint
    A S Padiyar, C P Paul, Atul Kumar, G Mundra and L M Kukreja
    International conference on processing and fabrication of advanced materials (PFAM-21) at IIT Guwahati during 10-13 December-2012

2011
  1. Kinematic analysis and experimental verification of a eccentric wheel based precision alignment mechanism for LINAC
    Mundra G., Jain.V, Singh.K.K., Saxena P., Khare.R.K, Bagre M.
    INPAC-11 , New delhi, Feb., 15-18, 2011, p. ID 72

  2. Preliminary results of half cell forming for 650 MHz, Beta 0.9 SRF cavity.
    Sandha R.S., Goswami S.G., Choudhary R.S., Kumar A., Dwivedi J., Mundra G., Sharma S.D., Gupta R.K., Bhatnagar V.K., Yedle K.N., Sharma S., Joshi S.C., Thakurta A.C
    INPAC-11 , New Delhi, Feb., 15-18, 2011

  3. Vacuum Brazing of Accelerator Components
    Rajvir Singh K.K. Pant, Shankar Lal, D.P. Yadav, S.R. Garg, V, K, Raghuvanshi, & G. Mundra
    International Symposium on Vacuum Science & Technology (IVS-2011), February 15-17, 2011, VECC, Kolkata

  4. Status of Indus-2 synchrotron radiation source
    G Singh, P R Hannurkar, S K Shukla, A C Thakurta, S S Prabhu, T A Puntabekar, P Fatnani, A D Ghodke, M Lad, R S Shinde, S R Tiwari, P Shrivastava, J Dwivedi, S S Kulkarni, G Mundra, S K Deb, C P Navathe and P D Gupta
    InPAC-11, IUAC New Delhi, Feb15-18, .2011

  5. Development of 1.3 GHz prototype Niobium single cell superconducting cavity under IIFC collaboration.
    Sandha R.S, Goswami S.G, Choudhary R.S, Kumar A, Dwivedi J, Mundra G, Sharma S.D, Gupta R.K, Bhatnagar V.K, Yedle K.N, Sharma S, Joshi S.C, Thakurta A.C.
    PAC-2011, March 28 to April 1, 2011, New york, USA.

  6. Development of Stepper Motor Controller with Current Regulation for Cryogenic Temperature Applications.
    Singh.K.K, Saxena P., Mundra G., Singh I.
    NSI -35 , VTU Belgaum, Jun., 7-9, 2011, p. NSI-35

  7. Development of SRF cavity cell forming at RRCAT
    R. S. Sandha, S. G. Goswami, R. S. Choudhary, Abhay Kumar, Jishnu Dwivedi, A. C. Thakurta, S. D. Sharma, Sanjay Sharma, T. Veerbhadraiah, R. K. Gupta, V. K. Bhatnagar, G. Mundra, G. V. Kane and S. C. Joshi,
    2nd International workshop on Accelerator-Driven Sub-Critical Systems & Thorium Utilization at BARC, Mumbai, December 11-14,2011

  8. Development of 1.3 GHz SRF cavities half cell machining process
    T. Veerbhadraiah , S.D. Sharma, R.K. Gupta, S. Sharma, V.K. Bhatnagar, S.G. Goswami, R.S. Sandha, J. Dwivedi, T. Maurya, A.M. Puntambekar, G. Mundra, S.C. Joshi, and P. D. Gupta.
    2nd International workshop on "Accelerator-Driven Sub-Critical Systems & Thorium Utilization at BARC, Mumbai, December 11-14,2011

  9. Development Efforts on Helium Vessel for 5 cell - 650 MHz SRF Cavity at RRCAT
    Abhay Kumar, Pankaj Kumar, R. S. Sandha, Subhajit Dutta, Rakesh Soni, Jishnu Dwivedi, A. C. Thakurta, V. K. Bhatnagar and G. Mundra
    2nd International Workshop on ADS and Thorium Utilization at BARC during December 11-14, 2011

2010
  1. Design of an electronic control unit for remote operation of an eccentric wheel based alignment system
    Harita B*, Saxena P,Singh KK, Singh I, and Mundra G
    ICI-2009, international conference on instrumentation Jan 23-25, 2010 at CUMMINS collage of engineering, Pune.

  2. Design and development of Torque measurement Rig for stepper motor at Cryo-temperature application.,
    Mundra G., Singh K.K., Singh L., Saxena P.
    ETEMC-10 , Indore, Apr., 17-18, 2010, (Oral presentation)

  3. Design development and testing of Linear Actuator for SCRF cavity tuner at cryo temperature.
    Mundra G., Singh K.K, Srivastava V.K., Singh L., Kulshreshtha P.K., Saxena P.
    ETEMC-10 , Indore, Apr., 17-18, 2010, (Oral presentation)

2008
  1. Development of stepper motor for Cryo temperature (LN2 ) application
    Mundra G, Singh L., Saxena P.,Mandle S, Singh KK, Nahru J and Pithwa C. K.
    National Seminar on Instrumentation,December 8 to 10, 2008 at Vishakhapatnam.

2007
  1. Preliminary design, analysis and manufacturing aspects of low beta 350 MHZreentrant superconducting RF cavity,
    Mishra Deepak, Prasad M., Jain V.K., Bagre M., Puntambekar A.M., Mundra G., Shrivastava P.
    Asian Particle Accelerator Conference - 2007 (APAC-07) , RRCAT, Indore , Jan. 29 - Feb. 2, 2007

2006
  1. Design and fabrication of a eccentric wheels based motorised alignment mechanism for cylindrical accelerator components,
    Mundra G., Jain V.K, Karmarkar M.G., Kotaiah S.
    Indian Particle accelerator Conference InPAC-06 , BARC/TIFR, Nov., 1-4, 2006

  2. Development of efficiently cooled drift tubes for high energy SFDTL RF cavities,
    Jain V.K., Kulshreshtha P.K., Mundra G, Karmarkar M.G., Kotaiah S.
    Indian Particle accelerator Conference InPAC-06 , BARC/TIFR, Nov., 1-4, 2006

2005
  1. Laser Based Cutting Tool for Steam Generator Tubes in PHWR,
    Mundra G., Upadhyaya B.N., Jain R.K., Choubey A.K., Vishwakarma S.C., Nathan T.P.S.
    National Laser Symposium - 2004 (NLS-04) , BARC, Mumbai, Jan., 10-13, 2005

  2. Development of laser based cutting machine for easy storage of irradiated PHWR pressure tubes,
    Upadhyaya B.N., Vishwakarma S.C., Gaure P., Jain R.K., Choubey A.K., Mundra G., Gupta Pankaj, Chadda S.K., Nathan T P S
    National Laser Symposium - 2004 (NLS-04) , BARC, Mumbai, Jan., 10-13, 2005

RRCAT reports/News letter/Hindi Patrika Pragati :

2019
  1. Investigation on Failure of Stainless Steel Sheets of Heat Shield Assembly of Vacuum Degassing Furnace
    Gupta R.K.*, Kumar A.*, Ganesh P.*, Kaul R.*
    e-Internal Report RRCAT, Vol. 14, no.2019 , 2019

  2. Design, Development and Installation of Upgraded Beam Position Indicators for Indus-2 Synchrotron Radiation Source
    Babbar L. K., Kumar Mukesh, Upadhyaya B. N., Bhatnagar V. K. , Yadav D. P., Tyagi Y., Holikatti A. C., Yadav Surendra, Vaishnav Deepjwalit and Puntambekar T. A
    e-Internal Report RRCAT/2019-02

  3. Design, Development and Installation of Ultra High Vacuum Compatible Beam Position Indicators for Insertion Devices in Indus-2
    Babbar L. K., Kumar Mukesh, Yadav D. P., Upadhyaya B. N., Sridhar R. (Retd.), Bhatnagar V. K., Tyagi Y., Holikatti A. C., Yadav Surendra, Vaishnav Deepjwalit and Puntambekar T. A.
    e-Internal Report RRCAT/2019-03

  4. Design and Development of Upgraded Integrated Type Beam Position Indicators for Dipole Vacuum Chambers of Indus-2 SRS
    Babbar L. K, Kumar Mukesh, Upadhyaya B. N., Bhatnagar V. K., Sisodia Brahmanand, Yadav D. P., Sindal Balkrishna, Tiwari S. K., Tyagi Y., Holikatti A. C., Yadav Surendra, Vaishnav Deepjwalit, Yogendra M. Sheth and Puntambekar T. A.
    e-Internal Report RRCAT/2019-10

  5. Design and Development of Flange Integrated Beam Position Monitors for Indus-1 Storage Ring and Infrared Free Electron Laser Set-up
    Babbar L. K, Kumar Mukesh, Yadav D. P., Upadhyaya B. N., Bhatnagar V. K., Sisodia Brahmanand, Sindal Balkrishna, Tiwari S. K., Tyagi Y., Holikatti A. C., Yadav Surendra, Soni Ajay Kumar, Vaishnav Deepjwalit, Yogendra M. Sheth and Puntambekar T. A.
    e-Internal Report RRCAT/2019-11

2017
  1. Development of normal conducting RF cavities and their installation in Indus-2
    Mahendra Lad and G. Mundra
    RRCAT newsletter volume 30 issue 2-2017

  2. Studies on the Determination of Fluoride and Sulphate Ion Concentrations in Niobium Electropolishing Solution Using Ion Chromatography Technique
    B.Q. Khattak, S.K. Sharma, B.P.Singh, G.S. Deshmukh, P. Ram Sankar and S.C. Joshi
    RRCAT Report RRCAT/2017-02

2016
  1. Development of a Novel Technology for Vacuum Brazed Transition Joints of Niobium and 316L Stainless Steel for Application in Superconducting RF Cavities
    A.Kumar, P. Ganesh, R. Kaul, P. Chinna Rao, D. P. Yadav, B. K. Sindal, P. Ram Sankar, K. V. Kumar, R. K. Gupta, K. Yedle, V. K. Bhatnagar, Ram K. Gupta, S. Sharma, M. K. Singh, S. K. Rai, A. Bose, S. D. Sharma, R. Sridhar, G. Mundra, S. C. Joshi and B. Singh.
    RRCAT Internal Report RRCAT/2016-02

  2. Plasma arc welding: Patallee va madhyam moti chaadaron ko poorN motaaee me nyoontam enThan ke saanth joDane ke liye ek santulit (utkarshk) upaaya
    G. Mundra & Vivek Bhatnagar
    Hindi patrika "Pragati" , Vol. 28 , 2016

  3. Installation & commissioning of CNC water jet cutting machine,
    Choudhary S.*, Mundra G.*
    RRCAT Newsletter , no.1 , 2016

  4. Optimization of Process Parameters viz. Mechanical polishing, Annealing and Electro-Polishing of Small Copper Substrates
    Sudip Kumar Nath, P. Ram Sankar, Jagdish Chandra, M.A. Manekar, Kanwal Jeet Singh Sokhey,
    RRCAT Report RRCAT/2016-10

2015
  1. Panch axiya sangankiya sankhyaatmak niyantrit masheen
    G. Mundra and S. D. Sharma.
    Hindi patrika "Pragati" 27-2015

  2. Study on Requirement of Nickel Plating on Stainless Steel Part in ‘316L Stainless Steel- OFE Copper’ Brazing
    Kumar A.*, Ganesh P.*, Kaul R.*, Yadav D.P.*, Karnewar A.K.*, Yedle K.N.*, Gupta R.K.*, Singh M.K.*, Sankar P.R.*, Bhatnagar V.K.*, Shridhar R.*, Joshi S.C.*, Kukreja L.M.*
    RRCAT Inernal Report Vol. 07, no. .., p. .. , 2015

  3. Development of 1.3 GHz nine cell SCRF Cavity
    M Bagre#, A Puntambekar, A Yedle, T Maurya, A Yadav, S Moulali, Vijayakumar V,P Ramshankar, R S Sandha, Sanjay Sharma, R Gupta, S C Joshi
    Indian Particle Accelerator Conference INPAC 2015, TIFR, Mumbai, Dec., 21-24, 2015

2014
  1. Jal Jet Kartan Yantra
    G. Mundra
    Hindi patrika "Pragati" year 2013-14

  2. A Study on Selection of Material Of Construction and Welding Consumable for Construction of Particle Accelerators Components requiring Low Magnetic Permeability.
    Abhay Kumar, P. Ganesh, R. K. Soni, Rakesh Kaul, V.K. Bhatnagar, S. Chouksey and L. M. Kukreja
    RRCAT Report RRCAT/2014-0

2013
  1. Indigenous development of advanced accelerator components
    G. Mundra, S.D. Sharma, V.K. Bhatnagar, R.K. Gupta
    Newsletter of Indian Nuclear Society 10, No. 3 &4, July- Dec.2013

  2. Manufacturing of Quadrupole magnet cores for IRFEL at ACDFS, RRCAT
    S.D.Sharma and G.Mundra,
    RRCAT News letter Vol 26, Issue 1, A-14,2013

  3. First development of 650MHz(β 0.9) single cell bulk niobium SCRF cavity
    Puntambekar, J.dwivedi, G. Mundra, P Shrivastav, S.C. Joshi
    RRCAT Newsletter, Vol. 26, no.2 , 2013

2011
  1. Report on Design and Development of a Prototype Five Axes Cam Based Motorized Precision Alignment System
    R. K. Khare, K. K. Singh, Vikas Jain, Piyush Saxena, Girdhar Mundra and S. C. Joshi.
    RRCAT internal report no. RRCAT/2011-07

Best viewed in 1024x768 resolution